Machined Steel Pulleys
Machined steel pulleys run perfectly true and are perfectly balanced, so they will eliminate the vibration created by low quality pulleys.
Accu-Link Belt
Accu-Link link-belts run much smoother than conventional drive belts. Since there is no continuous fabric through the length of the belt, the result is the belt absorbs vibration. The belt easily adjusts to length (in 3/4″ increments), without tools.
The Contractor Saw Performance Package installs in just minutes, with common shop tools. In most cases, all you will need is a Hex key (Allen wrench) to complete the installation. The first time you run the saw you are going to notice:
- Vibration reduced by 90%-95%
- A much quieter running saw
- More power to the saw blade
- An improved cut by 20%-25%
In-Line Industries is (in most cases) the only source in the US for machined steel pulleys for most imported contractor saws.
Note: Most imported contractor saws, (with part numbers shown in red below) use non-standard bore pulleys on the arbor shaft. To be sure we ship you the correct pulleys, you should measure the bore of the arbor pulley before ordering. If you do not have a set of dial calipers, you should take the arbor pulley to a machine shop to have it measured.
Note: The 3/8″ Accu-Link belt is a fractional horsepower belt. It will work well on machines such as Bench Top Drill Presses, but we do not recommend it for use on machines such as Table Saws. If you want to change belts on a Contractor Saw that has an original 3/8″ belt, we recommend you convert to 1/2″ pulleys, and upgrade to the 1/2″ Accu-Link belt.
We don’t cover return shipping on pulleys that were ordered incorrectly. By taking the time to measure the pulley before ordering, you will get the pulleys on your saw faster (and at less cost) than if you order the wrong pulley initially.
Buy Pulley & Belt Kits
All of the kits shown includes the motor pulley, arbor pulley and belt. Certain kits need to be made ‘in house’ and include a charge for additional machining time.
- PP2325: Pulley & Belt Kit: Sears/Craftsman$52.95Sears/Craftsman, Delta pre-1988, Ridgid, and all other saw with 5/8″ bore, hub type arbor pulleys.
- TR2325: Pulley & Belt Kit: Delta 10$52.95Delta 10″ Contractor Saw with 2 piece arbor pulley. (Held on by nut – Manufactured after Oct. 1988.)
- PP5510: Pulley & Belt Kit: Jet models with .551″ (14mm) bore arbor pulley$56.95Jet models with .551″ (14mm) bore arbor pulley *Check Arbor Pulley bore with Dial Calipers before ordering
- PP5790: Pulley & Belt Kit: General, some Powermatic models, Harbor Freight with .579″ bore arbor pulley$56.95General, some Powermatic models, Harbor Freight, with .579″ bore arbor pulley *Check Arbor Pulley bore with Dial Calipers before ordering
- PP5830: Pulley & Belt Kit: Grizzly, some Jet models, some Powermatic models with .583″ bore arbor pulley$56.95Grizzly, some Jet models,some Powermatic models with .583″ bore arbor pulley *Check Arbor Pulley bore with Dial Calipers before ordering
- PP5910: Pulley & Belt Kit: Jet models with .591$56.95Jet models with .591″ (15mm) bore arbor pulley *Check Arbor Pulley bore with Dial Calipers before ordering
Buy Individual Pulleys & Belts
Certain items need to be made ‘in house’ and include a charge for additional machining time.
- MSP2058: Machined Steel Pulley 2 O.D. with 5/8 bore$13.50Machined Steel Pulley, 2″ O.D. with 5/8″ bore
- MSP2358: Machined Steel Pulley Hub Type 2 1/4$13.50Machined Steel Pulley, Hub Type, 2 1/4″ O.D. with 5/8″ bore
- MSP2358T: Machined Steel Pulley Hubless 2 1/4 O.D. with 5/8 bore$13.50Machined Steel Pulley, Hubless, 2 1/4″ O.D. with 5/8 bore
- MSP2558: Machined Steel Pulley Hub Type 2 1/2 O.D. with 5/8 bore$13.50Machined Steel Pulley, Hub Type, 2 1/2″ O.D. with 5/8″ bore
- MSP23551: Machined Steel Pulley Hub Type 2 1/4 O.D. with .551 (14mm) bore$18.50Machined Steel Pulley, Hub Type, 2 1/4″ O.D. with .551″ (14mm) bore
- MSP23579: Machined Steel Pulley Hub Type 2 1/4 O.D. with .579 bore$18.50Machined Steel Pulley, Hub Type, 2 1/4″ O.D. with .579″ bore
- MSP23583: Machined Steel Pulley Hub Type 2 1/4 O.D. with .583 bore$18.50Machined Steel Pulley, Hub Type, 2 1/4″ O.D. with .583″ bore
- MSP23591: Machined Steel Pulley Hub Type 2 1/4 O.D. with .591 (15mm) bore$18.50Machined Steel Pulley, Hub Type, 2 1/4″ O.D. with .591″ (15mm) bore
Buy Accu-Link Green Belt
- ALLB12: Accu-Link Green Link Belt 1/2$8.00Accu-Link Green Link Belt, 1/2″ (sold by the foot @ $8.00 per foot)
- ALLB38: Accu-Link Green Link Belt 3/8$8.00Accu-Link Green Link Belt, 3/8″ (sold by the foot @ $8.00. per foot)
- ALLB124: Accu-Link Green Link Belt 1/2$32.00Accu-Link Green Link Belt, 1/2″ x 4′ (sold in a 4′ sleeve)